Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

An analytical proof of Hardy-like inequalities related to the Dirac operator

We prove some sharp Hardy-type inequalities related to the Dirac operator by elementary, direct methods. Some of these inequalities have been obtained previously using spectral information about the Dirac-Coulomb operator. Our results are stated under optimal conditions on the asymptotics of the potentials near zero and near infinity.     

A new joint model for longitudinal and survival data with a cure fraction

We develop a new joint cure rate model for longitudinal and survival data. The model allows for multiple longitudinal markers as well as a cure structure for the survival component based on the promotion time cure rate model, as described in Ibrahim et al. (Bayesian Survival Analysis, Springer, New York, 2001). Several characteristics and properties of the new model are discussed and examined. A real dataset from a melanoma clinical trial is given to demonstrate the methodology.     

60keV质子辐照对TiNi记忆合金薄膜马氏体相变的影响

 利用磁控溅射的方法在氧化后的单晶Si基片上制备了TiNi形状记忆合金薄膜，利用示差扫描量热法和原位X射线衍射研究了薄膜的马氏体相变特征。通过60keV质子注入（辐照）薄膜样品研究了H+离子对合金薄膜马氏体相变特征的影响，结果表明氢离子注入后引起了马氏体相变开始Ms和结束点Mf以及逆马氏体相变开始As和结束温度Af的下降，而对R相变开始Rs和结束温度Rf影响不大。掠入射X射线衍射表明H+离子注入后有氢化物形成。H⁺离子注入形成的氢化物是引起相变点的变化的主要因素。     

Immersed essential surfaces and Dehn surgery

It is known that an embedded essential surface F in a hyperbolic manifold M remains essential in Dehn filling spaces M(γ) for most slopes γ on a torus boundary component T of M. The main theorem of this paper is to generalize this result to immersed surfaces. More explicitly, if an immersed essential surface F has coannular slopes β₁,…,β_n on T, then there is a constant K such that F remains essential in M(γ) when Δ(γ,β_i)>K for all i. It will also be shown that all but finitely many Freedman tubings of a geometrically finite surface in M are π₁-injective.     

Enumeration of one-nodal rational curves in projective spaces

We give a formula computing the number of one-nodal rational curves that pass through an appropriate collection of constraints in a complex projective space. The formula involves intersections of tautological classes on moduli spaces of stable rational maps. We combine the methods and results from three different papers.     

Assignment of chemical shifts in benzohydroxamic acid and structure of its silylated derivatives by 15N enrichment

¹⁵N isotopic enrichment was necessary for the unequivocal assignment of the ¹H NMR lines to the protons in the NH–OH fragment of benzohydroxamic acid, BHXA, C₆H₅CONHOH, in dry dimethyl sulfoxide solutions. The assignment [δ(NH) = 11.21, δ(OH) = 9.01, ¹J(¹⁵N,¹H) = 102.2 Hz, ²J(¹⁵N,¹H) <1.5 Hz], which is opposite to that used by other authors, confirms the assignment extended to BHXA by Brown and co‐workers from the spectra of acetohydroxamic acid. The enrichment allowed also assignment of the ²⁹Si lines in the spectra of disilylated benzohydroxamic acid, (Z)‐tert‐butyldimethylsilyl N‐tert‐butyldimethylsilyloxybenzoimidate (2) and (Z)‐tert‐butyldiphenylsilyl N‐tert‐butyldiphenylsilyloxybenzoimidate (3), and confirmed structure of the monosilylated products, N‐tert‐butyldiphenylsilyloxybenzamide (4) and N‐tert‐butyldiphenylsilyloxy benzoimidic acid (5). Copyright © 2003 John Wiley & Sons, Ltd.     

Dual Homogeneous Forms and Varieties of Power Sums

We review the classical definition of the dual homogeneous form of arbitrary even degree which generalizes the well-known notion of the dual quadratic form. Following the ideas of S. Mukai we apply this construction to the study of the varieties parametrizing representations of a homogeneous polynomial as a sum of powers of linear forms.Research supported in part by NSF Grant DMS 0245203.Lecture held in the Seminario Matematico e Fisico on October 15, 2003Received: April, 2004     

On essential extensions of reduced rings and domains

A ring is said to be a left essential extension of a reduced ring (domain) if it contains a left ideal which is a reduced ring (domain) and intersects nontrivially every nonzero twosided ideal of the ring. We prove that every ring which is a left essential extension of a reduced ring is a subdirect sum of rings which are essential extensions of domains, but the converse implication does not hold. We give some applications of this result and discuss several related questions.Received: 6 January 2003     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003